TestBuyer
| Home | Contact us |
Search for: Model Manufacturer
 
 

Home > Current Amplifiers > FEMTO HCA-10M-100K

 
FEMTO HCA-10M-100K  

  FEMTO HCA-10M-100K

 
Bandwidth  10.00 MHz 
Gain [V/A]  1x10^5 
Input Noise  1.1 pA/Hz^1/2 
Status new
Launch Date
--
Discontinuance Date --
Supported until --
 
  FEMTO HCA-10M-100K Specs (82.9 KB)
 
FEMTO HCA-10M-100K Features
High Frequency - Only for Specialists?
Users of high frequency components are often confronted with problems including unwanted oscillation, poor ground shielding, nonlinearities, gain peaking and bandwidth reduction caused by poorly designed amplifiers. FEMTO High Frequency Amplifiers have been designed to eliminate such unwanted problems. Insensitive to signal source parameters and input wiring, FEMTO High Frequency Amplifiers perform meticulously within their specifications. No gain peaking, oscillation or significant bandwidth reduction will occur, even for source capacitances up to maximum 2 nF.
Bandwidth Independent of Source Capacitance
Merely a few picofarads of source capacitance can drastically decrease the bandwidth of high frequency current amplifiers. However, FEMTO Current Amplifiers do not have this limitation and are not influenced by a wide range of source capacitance. No frequency compensation or special adaptation is needed and the bandwidth and gain are constant up to the maximum source capacitance specified for each model.
"C"-Models
Amplifier models shown with an additional "C" are optimized for handling very large source capacitances up to nanofarads. They are very useful for measuring fast signals down to nanoseconds with large area detectors. For detectors with even more than 2 nF capacitance we offer custom designed models. Please contact us for details.
Adjustable Offset and Bias Voltage
For a high degree of flexibility FEMTO`s HCA Current Amplifiers offer precise offset and bias control by two trimpots. The wide range of the adjustable input offset current compensation preserves full dynamics even for signals with large DC-components. The Voltage at the bias-output can be adjusted precisely from -12 to +12 Volts using the multi turn bias-trimpot.
Applications
Fast Detection with Large Area Photodiodes
Spectroscopy
Photodetection with PMTs and Photodiodes
Ionization Detectors
Pyro- and Piezoelectric Detectors

  Manufacturer's contact info

 
FEMTO
Name FEMTO
Web http://www.femto.de/
Sales(URL) http://www.femto.de/support/sales.html
Email info@femto.de
Phone(1) +49-30-446-9386
Phone(2)
Fax +49-30-446-9388
Country
Address FEMTO Messtechnik GmbH, Paul-Lincke-Ufer 34, D-10999, Berlin, Germany
 
 

 

 
November 20, 2008 04:58 AM
| Media Kit | Privacy | Terms and conditions |   
Copyright © 2005 TestBuyer. All rights reserved.