Agilent HP E5062A
(ENA-L Series)
| Instrument Type |
S-Parameter |
| Low end frequency limit |
300.00 kHz |
| High end frequency limit |
3.00 GHz |
| Output Power Range |
–45 dBm to 10 dBm (extended) |
| Input Noise Level |
-- |
| Status |
new |
Launch Date
| -- |
| Discontinuance Date | -- |
| Supported until | -- |
| See also | E5061A |
 Agilent HP E5062A Specs (282.3 KB)
|
| Agilent HP E5062A Features : |
The Agilent E5062A general purpose network analyzers provide reliable basic S-parameter measurements with easy-to-use features and solid performance based on the latest in modern technologies. The Transmission/Reflection (T/R) test set options offer lower cost solutions, while the S-parameter test set options provide more accurate measurements with full two-port calibration. 75 ohm options, as well as 50 ohm, are available for CATV component measurements.
- Integrated T/R or S-parameter test set
- 50 or 75 ohm test port impedance
- 120 dB dynamic range (as of May, 2007) and 0.005 dB rms trace noise
- Built-in Visual Basic® for Applications (VBA)
|
|
 |
Manufacturer's contact info
| (courtesy of Used-Line.com) |
|
 |
|
