Bentham 225
(Programmable Lock-in Amplifiers)
| Low end frequency limit |
500.00 mHz |
| High end frequency limit |
100.00 kHz |
| Voltage Noise |
|
| C.M.R.R. |
|
| Dynamic Reserve |
20dB to 80dB depending on sensitivity setting |
| Min. Time Constant |
10 msec |
| Max. Time Constant |
10 sec |
| Status |
new |
Launch Date
| -- |
| Discontinuance Date | -- |
| Supported until | -- |
 Bentham 225 Specs (168.2 KB)
|
| Bentham 225 Features |
| The 225 is a GP-IB programmable lock-in amplifier designed with optical measurements in mind. It features dual inputs, making spectral scanning systems with more than one detector a reality, and square wave demodulation to give the best possible signal-to-noise ratio with the signals normally encountered in chopped light systems. The high impedance input is ideal for connection to photoconductors, including lead sulphide and lead selenide, or to the output of our pyroelectric detector head. Features: Two remotely selectable inputs for automatic detector changeover in spectral scanning systems. Square wave response gives best signal-to-noise ratio in optically chopped systems. Modular input amplifiers to cover all existing optical detectors. Integrating A to D output allows digital signal averaging in place of conventional RC time constant. All functions programmable via GP-IB.
|
|
 |
Manufacturer's contact info
|
 |
|
