Advantest R3765CG
(R3765CG/3767CG Series)
| Instrument Type |
Vector |
| Low end frequency limit |
300.00 kHz |
| High end frequency limit |
3.80 GHz |
| Output Power Range |
100 dB |
| Input Noise Level |
-90 dB (40 MHz to 3.8 GHz) RBW 3 kHz; |
| Status |
discontinued |
Launch Date
| -- |
| Discontinuance Date | Mar-2006 |
| Supported until | -- |
| See also | R3767CG |
 Advantest R3765CG Specs (48.3 KB)
|
| Advantest R3765CG Features : |
| The R3765CG/R3767CG network analyzers are vector network analyzers that incorporate a new RF circuit analysis technique. The measuring frequency range is from 300 kHz to 3.8 GHz (R3765CG)/300 kHz to 8 GHz (R3767CG). The unique ADVANTEST high-speed signal processing technology enables a faster measurement speed. In addition to the basic model, a model with built-in bridge transmission/reflection characteristic measurement and a model with a built-in S-parameter test set for forward and reverse measurement are also available. An optional 3-port test set or 4-port test set can be added to these models. By installing additional input channels in the receive section, the multi-port models allow perfectly simultaneous measurement of two different measurement paths, revolutionizing the measurement efficiency of multi-port devices. For type C, 4 S-parameters can be displayed simultaneously through 0.15 ms/point high speed frequency sweep and 4 channel/8 trace. Frequency, output level, RBW, and setting time can be set for each segment. Allows programming or data analysis using an MS-DOS PC with an MS-DOS format FD drive.
|
|
 |
Manufacturer's contact info
| (courtesy of Used-Line.com) |
|
 |
|
