Ando AQ6315A
(AQ6300 Series)
| Form Factor |
Benchtop |
| Instrument Type |
Single-pass monochromator |
| Low end wavelength limit |
350 nm |
| High end wavelength limit |
1750 nm |
| Wavelength Resolution |
50.0 pm |
| Wavelength Accuracy |
0.05 nm |
| Dynamic Range |
40dB (± 1nm, 633/1152/1523nm |
| Status |
discontinued |
Launch Date
| -- |
| Discontinuance Date | -- |
| Supported until | -- |
| See also | AQ6315B |
 Ando AQ6315A Specs (982.7 KB)
|
| Ando AQ6315A Features : |
| Analysis functions for WDM and other optical devices (LD, LED, FBG, etc.). Provides ±0.05 nm wavelength accuracy in the 1550 nm band, with ±0.02 nm wavelength linearity, makes it especially useful for WDM devices, such as high-precision loss wavelength characteristic evaluation. The monochro mode can be set to single-pass or double -pass to match your measurement application needs. Covers from 350nm to 1750nm and noise level has been suppressed to allow the AQ-6315A/-6315B to measure light at down to - 90Bm Polarization dependency has been slashed to ±0.05dB, enabling accurate measurement of optical amplifier gain and other critical measurements. High-level accuracy Accurate to within ±0.3dB. High-power measurement: Max.+20dBm (100mW) Even high power output from an optical amplifier can be measured directly without an optical attenuator High wavelength resolution Achieves wavelength resolution of 0.05nm.
|
|
 |
Manufacturer's contact info
|
| Name | Ando |
Yokogawa Electric Corporation and Ando Electric Co., Ltd. have merged. Ando optical fiber test equipment, optical measuring instruments, and wireless communications equipment have been transferred to Yokogawa.
Go to details
|
| Web | http://www.yokogawa.com/tm/top/tm-welcom |
| Sales(URL) | |
| Email | |
| Phone(1) | |
| Phone(2) | |
| Fax | |
| Country | |
| Address | |
| (courtesy of Used-Line.com) |
|
 |
|
