Agilent HP 4263B
(LCR Meters)
| Test Freq. Range Low |
100 Hz |
| Test Freq. Range High |
100 kHz |
| Resistance Range Low |
1 mOhm |
| Resistance Range High |
100 MOhm |
| Capacitance Range Low |
1 pF |
| Capacitance Range High |
1 F |
| Measurements |
Z, L, C, Q, D, R, X, G, B, Y |
| Status |
new |
Launch Date
| -- |
| Discontinuance Date | -- |
| Supported until | -- |
 Agilent HP 4263B Specs (757.8 KB)
|
| Agilent HP 4263B Features : |
The Agilent 4263B LCR meter is the most cost-effective low-end LCR meter from Agilent Technologies, designed for both component evaluation on the production line and fundamental impedance testing for benchtop applications. The Agilent 4263B has five test frequencies that allow you to simulate testing under the correct conditions: 100 Hz, 120 Hz, 1 kHz, 10 kHz, and 100 kHz. An optional 20 kHz test frequency can be added to those five frequencies (Option 002).
- 0.1% basic accuracy
- 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz test frequencies
- 20 mV to 1 Vrms in 5m Vrms steps
- Test signal level monitor function
- High-speed measurement: 25 ms
- High-speed contact check
- Wide capacitance test range
- Transformer parameter measurements (option 001)
- Select from 11 impedance parameters
- Add three complex transformer parameters with Option 4263B-001
- Set signal level with 5mVrms resolution
- Monitor actual ac voltage and current levels
- Pick from many test fixtures and accessories
- Save and recall up to ten measurement setups
|
|
 |
Manufacturer's contact info
| (courtesy of Used-Line.com) |
|
 |
|
