Agilent HP 432A
(Analog Power Meters)
| Channels |
1 |
| Freq. Range Low |
100.00 kHz |
| Freq. Range High |
110.00 GHz |
| Sensor Type |
-- |
| Computer Iterface |
-- |
| Sensors |
8480 |
| Status |
new |
Launch Date
| -- |
| Discontinuance Date | -- |
| Supported until | -- |
 Agilent HP 432A Specs (378.4 KB)
|
| Agilent HP 432A Features |
The Agilent 432A provides high accuracy over a wide temperature range. By measuring the output voltage of the thermistor bridges and computing the corresponding power, even higher accuracy of ±0.2 percent ±0.5 microW can be obtained. Accuracy can be maintained on even the most sensitive range because the error due to thermoelectric effect is reduced to a negligible level.
- Power Range: 7 ranges with full-scale readings of 10, 30, 100 and 300 µW 1, 3 and 10 mW; also calibrated in dBm from -20 dBm to +10 dBm full scale in 5 dB steps
- Noise: Less than 0.25% of full scale peak (typical)
- Response Time: At recorder output, 35 ms time constant (typical)
- Fine Zero: Automatic, operated by front-panel switch
- Zero Carryover: Less than 0.50% of full scale when zeroed on most sensitive range
- Meter: Taut-band suspension, individually calibrated, mirror-backed scales. Milliwatt scale more than 100 mm (4.25 in) long
- Calibration Factor Control: 13-position switch normalizes meter reading to account for thermistor sensor calibration factor. Range 100% to 88% in 1% steps Thermistor Sensor:
- Thermistor sensors are required for operation of the 432A.
- Power Consumption: 115 to 230 Vac ± 10%, 50 to 400 Hz, 1.5 watts
- No thermoelectric error for high accuracy over a wide dynamic range
|
|
 |
Manufacturer's contact info
Price information
 Read Descriptions of Price Categories before you compare or price any equipment! |
| |
Price |
Date |
| MFR List Price of NEW item |
$12634 |
2005 |
| Distributor Street Price of NEW item |
|
|
| ULV of USED / REFURBISHED item |
$160 |
2008 |
| (courtesy of Used-Line.com) |
|
 |
|
