Agilent HP E4417A
(EPM-P Series)
| Channels |
2 |
| Freq. Range Low |
9.00 kHz |
| Freq. Range High |
110.00 GHz |
| Sensor Type |
-- |
| Computer Interface |
GPIB, RS-232, RS-422 |
| Sensors |
8430; E-series CW and E9320, E9300 |
| Status |
new |
Launch Date
| -- |
| Discontinuance Date | -- |
| Supported until | -- |
| See also | E4416A |
 Agilent HP E4417A Specs (726 KB)
|
| Agilent HP E4417A Features : |
The Agilent E4417A dual channel EPM-P series power meter, for peak, average, peak-to-average ratio and time-gated measurements, using the E9320 peak and average power sensors.
- 20 Msample/s per second sampling rate for reliable continuous and single shot measurements on wide bandwidth signals
- Time-gated and free run power measurements
- Free Analyzer Software software for complete pulse and statistical analysis, software is located In the Library
- 8 pre-defined wireless configurations (GSM, EDGE, NADC, iDEN, Bluetooth™, IS-95 CDMA, W-CDMA and cdma2000)
- Frequency range: 9 kHz to 110 GHz, sensor dependent
- Power range: -70 to +44 dBm, sensor dependent
- Display resolution: Selectable resolution of 1.0, 0.1,0.01, 0.001 dB in logarithmic mode, or 1 to 4 significant digits in linear mode.
- Offset range: ±100 dB in 0.001 dB increments, to compensate for external loss or gain
- Single sensor dynamic range
- E-series E9320 peak and average power sensors:
70 dB maximum (normal mode); 85 dB maximum (average only mode)
- E-series CW power sensors: 90 dB
- E-series E9300 average power sensors:80 dB maximum
- 8480 series sensors: 50 dB maximum
|
|
 |
Manufacturer's contact info
| (courtesy of Used-Line.com) |
|
 |
|
