Elan Digital Systems CFD200
(Digital Multi Meter / Scope CF Card)
| Display Count |
-- |
| Measurements |
DCV, ACV, Resistance, DCA, ACA, TRMS |
| Bandwidth |
-- |
| Sample Rate |
40.0 kSa/sec |
| Display |
5 ½ digit resolution |
| Status |
new |
Launch Date
| -- |
| Discontinuance Date | -- |
| Supported until | -- |
|
| Elan Digital Systems CFD200 Features |
The CFD200 is a new concept in test equipment that allows a PDA, Laptop or Tablet PC to be turned into a dual channel Digital Multimeter with sophisticated analysis capabilities. SmartAnalysis software facilitates step-by-step fault investigation with instant display of results and an interactive diagnostic guide. With the CFD200 it is possible to integrate multiple measurement functions into a single hardware/software platform, providing high-level analysis features and a small, lightweight and portable unit. The CFD200 is an extended Compact Flash design offering two channels with full galvanic isolation to host and channel-to-channel. Each offers a scope function up to 40KSPS with full datalogging capability and 650V max. input voltage.
- Dual channel 5 ½ digit resolution, up to 40,000 Samples/sec/ch
- DC Volts: 650V, 60V, 6V, 2V(HiZ), 0.01% Accuracy
- AC RMS Volts: 440V, 40V, 4V True RMS, 0.25% Accuracy
- DC Input Z: >10Mohms (2V mode > 100Mohms)
- Ohms: 10K, 100K, 10M, 40M+, Diode, Continuity, 0.25% Accuracy
- DC Current: 350mA (Fused 400mA), 0.1% Accuracy
- AC Current: 250mA RMS (Fused 400mA), 0.25% Accuracy
- UL Safety rated to 300V RMS CATII
- Shrouded 4mm terminals
- DC Coupling BW: DC to 7KHz typical
- AC Coupling BW: 2Hz to 7KHz typical
- Extended CF I card with impact resistant housing
|
|
 |
Manufacturer's contact info
|
 |
|
